Secumat® fixing and earth anchor system: Permanent protection against erosion on slopes, trenches, and brooks
When combined with Secumat® 3D Mesh products, the Naue Secumat® fixing and earth anchor system provide a high-quality and secure erosion control system from a single source. They provide secure retention on challenging gradients. When combined with our areal erosion control products, they are particularly suitable for stabilising embankments and slopes at risk of erosion due to instability or the absence of vegetation.
Secumat® PinU is a U-shaped steel pin which is sturdy but easy to use. The steel has a diameter of ø 3,5mm and a length of 23cm.
This fixing is the perfect addition to areal Secumat® 3D Mesh erosion control mat. They allow erosion control products installed on flat surfaces to be fixed to the subsoil with minimum space requirements.
Secumat® Anchor is an earth anchor system for fixing areal Secumat® products, specifically Secumat® product combinations of 3D Mesh and geogrids. It absorbs forces on the slope and transfers them to the subsoil by anchoring them back into the ground.
The earth anchor system comprises a set of four individual components. It locks in place using the toggle dowel principle in which the foot of the anchor is locked and tightened using the anchor wire. The load plate is then fixed in place by the wedge grip using the anchor wire.
Secumat® Anchor effectively forms a cone of resistance in the soil and supports loads up to the load carrying capacity of the soil. The retaining forces are effective immediately.
Software and product recommendation for erosion control systems
Naue erosion control systems provide temporary and permanent erosion control for any application in the form of Secumat® products. This includes the Secumat® ClassicLine geocells, earth anchors and erosion control steel pins as well as combined 3D Mesh products. Secumat® GreenLine uses biodegradable areal products and wooden pins for fixing.